How to use electric terminal crimping tools

Update:30-10-2020
Summary:

In theory, the electric terminal crimping tool is the h […]

In theory, the electric terminal crimping tool is the hardware tool used to suppress the route. In general connection to the network cable or telephone line, the crimping tool is required to press the line into the port, and match the corresponding color of the network cable or telephone line . In some mechanical circuit installations, the electric crimping tool also presses the wire into the terminal. The purpose is to merge some wires together. Here is how to use the electric terminal crimping tool.

The usual practice is to select the appropriate terminal, put it into the jig, insert the jig into the crimping tool, and stop near the middle position, insert the terminal out of the wire groove, and start crimping, according to the above method one Press one by one, and press the other end one by one.

The first edge of the crimping pliers is used for peeling, and there should be a gap of about 1.5 mm when the pliers are closed. The second one is for cutting, without any gaps. The "convex" shaped space in the middle is used for crimping. Insert a crystal head to see if the 8 serrations are aligned with the copper plate. Do not press hard, otherwise one crystal head will be scrapped.

There are many types of bare terminal blocks. Generally, crimping tools are selected according to the required pressure type. Some models can be insulated and bare at the same time, and there are also insulated or bare alone. Some require pressurizing molds, hydraulic manual ones, and electric ones. However, electric crimping tools are very popular nowadays, which can save manpower and energy costs. They are the first choice for general small and medium-sized enterprises and large-scale enterprises. The best choice to buy.