How to use hardware cable cutter

To accurately grasp how to use cable cutters, the use of cable cutters will be an ideal temperature processing range. The temperature of plastic processing should be controlled so that it is close to this temperature range.

First of all, there will be some friction when the feeding area is reached. Of course, this kind of plastic is not heated well, and the kneading is not uniform, which will easily cause the inner wall of the plastic bucket and the surface of the screw to be larger. abrasion.

The speed of the cable cutter should be adjusted moderately, because some plastics are added with a reinforcing agent, such as glass fiber minerals or other filling materials. The friction of these materials on metallic materials is often much greater than that of molten plastic, so when using cable cutters, you should pay attention to the problem of good speed. This will greatly improve the efficiency of cable supervision.

In addition, it will strengthen the production of more shredded fibers. The shredded fibers contain sharp ends, so that the abrasion capacity will be greatly increased, and the scraping effect will be reduced after the mineral surface slides at high speed. So the speed should not be adjusted too high.