What are the precautions in the use of hydraulic tools

Try to make the working environment as clean and bright as possible. If there is any potential explosion in the atmospheric environment of the workplace, electric pumps should not be used, but pneumatic pumps should be used. If sparks are generated by the metal impact, precautionary measures should be taken.
Reaction Arm: The correct reaction force is required, adjusting the reaction arm or reaction surface.
Avoid misoperation of tools (wrenches): The operation remote control panel of the pump is only used by the wrench operator, so as to avoid the operator and the pump being separated too far.
Guarantee the operating space: most of the wrenches are not held by hand in use. If the wrench must be held or fixed by hand, other methods should be found to achieve the purpose.
Avoid Electric Shock: Make sure the power supply is well-grounded and of proper voltage when using the electric pump.
The wrench should be kept when not in use: the temporarily unused wrench and wrench accessories should be properly stored to avoid damage.
Use the right wrench: Do not work with a small wrench or attachment in place of a large wrench, and work without a wrench that does not fit.
Use Appropriate Safety Apparel: When using manual/automatic hydraulic equipment, gloves, hard hats, safety shoes, ear protection, and other protective clothing should be used.
use safety glasses
Mobile device: The unit is not used when moving the device.