It is convenient to put and remove the terminal, the upper die is fixed by the bayonet lock, the lower die is fixed by the marbles, and the die is clamped against the marbles to prevent it from falling off during the decompression process. The mold can be removed by pushing with your hand.
When the pressure is completed, turn the handle 45°clockwise, close the handle, and top return the oil valve switch to return the lower die.
withstand voltage 20KV for five minutes.
With two-stage hydraulic technology, low speed, high slowness and no load, pressing dies quickly press to the position of the copper and aluminum nose. When the pressure begins to increase, turn to slow speed until the copper and aluminum nose is crimped.
Thickened plastic packaging makes it easy to carry.